Care Stickers
How to Apply Your Sticker
- Clean the surface with mild soap or isopropyl alcohol and let it dry completely.
- Peel the sticker carefully and position it lightly.
- Smooth from the centre outward to remove air bubbles.
- Press firmly around the edges.
- Allow 24 hours before washing or heavy use.
Preparing the surface.
- Clean with mild soap or isopropyl alcohol— removes oils, fingerprints, and dust that weaken adhesion.
- Dry fully — even tiny moisture films can cause bubbling.
- Avoid glass cleaners — many contain silicone, which reduces stickiness.
Applying the sticker
- Peel slowly to avoid touching the adhesive with fingers.
- Position lightly first — vinyl lets you “float” it before pressing down.
- Start from the centre and smooth outward with a card or thumb to push out air.
- Press firmly around the edges — this is where lifting usually begins.
⏳ Aftercare for best results
A few small habits make the sticker last much longer.
- Give it 24 hours before washing, handling heavily, or exposing to moisture.
- Hand‑wash bottles or mugs — laminated vinyl is tough, but dishwashers vary in heat and detergents.
- Avoid extreme heat (car dashboards, radiators) during the first day while the adhesive cures.